null
On Sale!

Ekornes Stressless Recliner Swivel Ring with Clips

MSRP:
Was: $1,364.80
Now: $1,194.10
(You save )
(7 reviews) Write a Review
In stock in a number of sizes- 6 clip large are no longer available.
Shipping:
Calculated at Checkout

Description

Ekornes Stressless Swivel Ring Replacement Kit with Connecting Clips- Put the Spin Back Into Your Stressless Recliner!

The Ekornes Stressless Swivel Ring Replacement Kit is used in the rare case that the ring attached to the bottom of your Stressless recliner is damaged. If you need the swivel ring, but not the connecting clips (which connect to the swivel ring under the chair) take a look at the Stressless Swivel Ring (without clips).

Functionally, this item includes the same components as the Stressless Elevator Ring Attachment Kit with Clips

Please measure the outside dimensions of your swivel ring as these are available in a number of sizes. Also it is important to know whether your chair was built before or after 2011.

*Important Information about Stressless Swivel Rings and Sizing:

Ekornes swivel rings will only fit models manufactured by Ekornes from 1993 to Present.

Prior to 2012, Ekornes manufactured 2 different sizes of wooden bases for the 3 chair sizes: The Small/Medium & the Large. Clever design allowed them to fit a Small and Medium Seat on a base that had the same diameter on the bottom. The engineers at Ekornes are constantly innovating and announced at the end of 2011, that they would introduce 3 sizes of bases: The Small, the Medium, & the Large. The bases are difficult to tell apart unless you lay the chair on its back and count the Black Plastic Clips that connect the Wooden Base to the Plastic Swivel Ring that touches the floor. If there are 6, your wooden base was produced prior to 2012. If there are 8, your wooden base was produced post 2012.

Compare the Elevator Rings from Stressless

If you purchased your recliner chair after 2012, you most likely have a base with 8 clips underneath. It is still possible to receive 6 clip styles as they have not been disbanded/eliminated. Ekornes has simply switched to primarily producing 8 Clip Bases from 2012 forwards. Let's look at the measured diameters of the circular rings. This is a secondary way to determine (or at least rule out) the size of your recliner base, so you'll know what size swivel ring to order.

Ekornes Elevator Ring Approximate Dimensions

 *For Swivel Ring installation instructions, please view the instructions image at the top of this page (under the image of the swivel ring). 

Additional Details

SKU:
ESWIVELRWCLI

7 Reviews

  • 5
    replace the swivel ring

    Published by Riso on 6th Feb 2022

    Easy to replace if instructions are followed. Works like new.

  • 5
    Swivel Ring Replacement

    Published by Julia on 3rd Feb 2022

    This is so worth the money. It took quite awhile to receive it [container ship problem is my guess] but we were able to get the old ring and the 6 clips off and the new one on in less than an hour! Note: if your clips are old they break and do not just pry out. Chip off the clip part and then drill out the screw part being careful not to drill down too far. Worked like a charm.

  • 5
    Swivel ring w/clips

    Published by NTW on 8th Jun 2021

    I took a chance ordering this as my chair is a different brand that is out of production. I assumed I'd be able to make it fit. Luckily, the holes lined up and the size was right, so I am happy with the purchase. Shipping and notification was fast.

  • 5
    Finally my stressless spins again

    Published by Benny on 29th Sep 2020

    I couldn't spin in my recliner for years, but found Unwind and ordered online. After replacing this, it spins like new again. It was well worth it!

  • 5
    Worked great. It was a little hard to remove the old clips but the new clips went in easily

    Published by Ralph mendez on 21st Apr 2020

    Worked great

  • 5
    Elevator Ring

    Published by Patti on 21st May 2019

    Really like the ring so we could elevate my husbands chair because he has been having back problems.

  • 5
    SWIVELLING IN PLACE

    Published by Unknown on 26th Jun 2018

    For a few years, after the plastic swivel ring on my Ekornes stressless recliner broke, I was only able to swivel the chair about 90 degrees. Initially, I tried to epoxy the ring together, and was able to swivel 360 degrees for awhile, until that repair broke apart, ultimately leading to the ring breaking again (now two places), with no ability to swivel at all. AND THEN AFTER AN ON-LINE SEARCH, I found "Undwind .COM", with a clear description of which parts I needed for my chair. The best part is I ordered them, one ring and clips (just in case), and they arrived approximately a week after ordering, were easy to install, and now I'm SWIVELLING IN PLACE/SPACE all the time, just like brand new---->AND THE PRICE WAS RIGHT ALSO....A very satisfied customer.

Related Products